Office: No 9, 91/45 Nguyen Chi Thanh - Ba Dinh Dist. - Hanoi / Tel: 84-4- 7734926 / Fax: 84-4-47734930 / Email: firstname.lastname@example.org
ADSS Supporting Equipment
Fiber Optic Accessory
INNO Fiber Master IFS-10 Core-Alignment Fusion Splicer with the New DACAS (Digital Analysis Core Alignment System) is one of the most dependable splicers on the market. The Fiber Master splicer features a rubberized design for field use in harsh weather conditions. The IFS-10 has a friendly, intuitive GUI (Graphical user Interface) with a 5 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The sizeable, large battery capacity at full charge allows for up to 350 splices. Amazingly, the IFS-10 splicer is the most reliable and user friendly Core Alignment splicer in the world.
2.2kg weight (without battery)
Splicing method: DACAS
(Digital Analysis Core Alignment System)
Harsh weather conditions adaptability
Friendly smart GUI
Large battery capacity: 350 Splice and Heat
Quick optimize menu
High precision splicing
USB master port, easy to upgrade software
Operate in Bi-directional view
Typically 350 cycles
IFS-10 serves over 350 cycles of splicing. The battery capacity is 9800mAH with the highest level in ARC fusion splicer equipment. Also, the battery life will be demonstrated via 5 stage of battery indicator.
Easy exchange of electrodes
The electrode does not require using screw driver. It can simply remove and replace with one’s hand. Replacement procedure is following;Loosen screw located on electrode cover-->take electrode out of electrode cover (Electrode is fitted in electrode cover).
Easy to clean the mirror
Anti-fog treated mirror is included in IFS-10. It does not require cleaning the mirror as replacement any parts. Easy maintenance of mirror gives better splicing results.
Heating oven with a zoom window
After splicing, it is clear to figure out sleeve processing. IFS-10 heat oven has a magnifying glass. Users can easily check the sleeve via magnifying glass window.
Bright LED for dark environment
LED light is enough bright to work in dark place. Users can find out thin optical fiber during working in dark environment.
Independent clamp motion
Both clamps are independent to adjust each other. If the clamp needs to be replaced, it can change one clamp not both.
Keypad is illuminated brightly so that each button can be figured out in dark working environment. Also pressing usage time is more than 1 million times.
Changeable holder for multi-functional splicing
Both side holders can be replaced easily with screwed driver. Users are available to use a variety of fiber for their needs
IFS-10 monitor is protected by tempered glass LCD. Core image is clearly showed with 5” LCD monitor